The PMS series is suggested for small size plants, all models are totally pre-assembled at our factory.
– Axial motor-fan with direct coupling, low installed power, low noise levels. – Tower body and tank entirely made of fibreglass, corrosion-free material. – Distribution system in PVC, PP or PE equipped with wide non-clogging PP spray nozzles. – Fill pack with different kinds of air/water channels, suitable for the use with different water types. – Capacity: from 18 to 860 KW (indicative capacity referring to a machine, thermal gradient 5°C).
SHELL (casing, top and -optional- basin) entirely made of fibreglass reinforced polyester resin, structurally self-supporting and of exclusive MITA design, with gelcoat external finish as UV-protection.
WATER COLLECTION BASIN with sloping base to allow complete emptying, and smooth internal finish with rounded corners for easy cleaning.
Equipped with flanged water outlet, overflow, drain connections and make-up (complete with floating ball) connections.
The cooling tower with basin is complete with FRP air inlet louvers.
NUTS AND BOLTS in stainless steel AISI 304.
AXIAL FAN SYSTEM made of:
FAN PROTECTION GRID in stainless steel AISI 304
HATCH for visual inspection in nylon reinforced with fibreglass.
DRIFT ELIMINATORS, high efficient, certified by EUROVENT, consisting of three folds PP sheets, thermoformed under vacuum and welded together to form panels of such shape and size as to guarantee maximum efficiency of droplet separation from the airflow drawn by the fan.
WATER DISTRIBUTION SYSTEM made of PN 10 pipes and connectors complete with flanged connection, entirely made of plastic material, consisting in a main header and branches with non-clogging, static type, spray nozzles.
This system grants a perfect and even perfusion of the fill pack, and therefore an optimal performance.
The non-clogging nozzles are made of isotactic polypropylene with full cone (120° angle) spraying.
FILL PACK (or heat exchange surface) consisting of PVC or PP sheets, thermoformed under vacuum and welded together (air/water channels of different kinds suitable for the cooling of different water types).
The shape and the size of the fill pack optimise the contact between air and water, and therefore the heat transfer process.
All models are available in the following special versions:
PMS K19 brochure
PMS K12 brochure
PMS design features
Request of quotation form
Operating cost saving