High cooling efficiency, on-site transportation and installation more than easy: in 2012, MITA Cooling Technologies supplied a Polish power generation company with two PMM modular cooling towers. The success of the supply was ensured by the complete support of MITA and Termster, a local Polish partner, throughout the entire process: from the selection of large chillers to their simple installation.
In 2012, MITA Cooling Technologies partnered with a Polish company specializing in power generation.
This customer, with over 70 years of experience, still operates both in Poland and abroad. The requirement: process water cooling, considering a high temperature jump (10°C, from the initial 36°C) and a process water flow rate of as much as 770 cu m/h. Required thermal capacity of 7.7 MW.
In addition, given the cold ambient air in the installation area, it was advisable to adopt anti-condensation technical solutions.
MITA has supplied two PMM B 55 modular cooling towers to the Polish customer. These industrial towers have a high thermal capacity and can be easily transported and assembled on site precisely because of the module structure.
Additional supplies for the Polish oil & gas company were certified drip separators and some antifreeze solutions (PTC, anti-condensation electric motor heater).
The success of this delivery was driven by several key factors.
First, MITA Cooling Technologies and Termster, a Polish partner, offered comprehensive support before, during, and after installation. Second, the choice of large chillers, combined with the versatility of the modular design, allowed the supply to be managed efficiently. Finally, ease of maintenance thanks to removable doors for internal inspection ensured reliable operation for the client company over time.
Ask for Information
MITA Cooling Technologies scores, together with the agency EETS, a new achievement for the food industry: a poultry products company chose the PAD-V adiabatic cooler for a section of its production processes.
Learn More
In 2016, the University of Palermo modernized its buildings with a polygenerative solar system, part of the EU-funded STS-Med project. The absorption chiller needed a cooling system.
Learn More
Cogeneration plant – capacity 3,7 MW – model PME 3354/3 E Super Silent.
Learn More
